A robust geological compass that combines two methods of measurement in one instrument: the measuring method for planes and linears according to Prof. Dr. Clar as well as the measurement method according to Brunton. In a measuring process, the structural data of planes or linears are determined by a single application. The engraved vertical circle (270 ° in 2 ° increments) can be read directly from above. The built-in inclinometer with dragonfly allows also the method dip and strike and topographical recordings. The waterproof housing is made of magnet-free, durable, full light metal with blue anodized surface protection.compass needle: automatically locked when not in use,north end red, south end black, internationally applicable, because declination and inclination adjustable, length 47 mm, horizontal circle diameter 60 mm (inside diameter 48 mm ), Division interval 1 °, figuring every 10 °, cardinal directions international (east and west interchanged), declination adjustment + 60 °, dip angle circle diameter 27 mm, measuring range 270 °, division interval 2 °, reading by estimate 1 °, reading of the inclination angle 1 ° direct, movement of the measuring plate adjustable, dimensions with closed lid 72 x 93 x 27.5 mm, weight 330 g. Delivery complete with carrying cord in carrying bag with belt loop.

Areas and linear arcs are determined in one operation. This compass is an ideal device for beginners, but also professional geologists will have their pleasure in this mompass with the following technical features:Novel reading of the drop angle: By pointing the vertical circle to the observer, azimuth and fall angle (measuring range: 270 °) can be recorded at a glance. This is particularly advantageous for beginners, e.g. Students, since they can see immediately, at which needle end is to be read. It has an unlimited declination adjustment and is small, compact and lightweight. Weight approx. 200g. Delivery includes bag with velcro closure and belt loop.Features:Waterproof housingDeclination adjustment from outside, without opening the housingInclination: Nearly global use possibleShorter settling time of the needle

Design like I 80, but with additional mirror and inclinometer! The GEKOM-N pro is a robust structure compass according to Prof. Dr. Clar. The microstructure data of surfaces or linears are determined in a single measurement process. The vertical circle can be read directly from above. The upper part of the housing can be removed to adjust the declination and inclination. Housing made of non-magnetic, durable, solid light metal with anodized surface protection, compass needle: automatically locked when not in use, north end red, south end black, with adjustable inclination weight, length 44mm, horizontal circle diameter 60mm, graduation interval 2°, reading by estimation 1°, figuring every 10° , cardinal points international (east and west swapped), declination adjustment 60°, vertical circle diameter 19mm, measuring range 270°, graduation interval 5°, reading by estimation 1°, movement of the measuring plate can be adjusted, dimensions with the lid closed 86 x 70 x 20 mm, weight 240g. Delivery incl. bag. Features: Waterproof case Declination adjustment from the outside without opening the housing Inclination: Almost global use possible Faster needle settling time

for COCLA - I 30

according to Prof. Dr. Clar; for geological, geophysical, mining and tectonic measurements; for measuring azimuth and angle of dip in one single operation. Horizontal circle of transparent plastic Ø 50 mm; graduation 1/1° (1/1g), numbering 10° (10g) each; automatic arresting system of the compass needle when the compass is not in use, adjustable inclination weight, efficient damping of the oscillations of the magnetic needle due to eddy current damping, reading within only approx. 3 seconds, magnetic needle: the North end of the needle is red and the South is black, length 50 mm, international cardinal points (East and West inverse); declination adjustment +/- 30° (+/- 30g); deep etched tracing edge graduated in 60 mm; vertical circle on cover hinge, graduation 5° (5g), estimation 1° (1g); diameter 25 mm, cover plate with friction adjustment screw, transparent bottom and transparent spherical level with reading mirror allow overhead measurements; • size: 73x95x25 mm• weight: 260 gleather case for COCLA (not included) :IT 30

Even in the age of satellite-based systems, orientation in the terrain is often done the traditional way with topographic map, compass and altimeter. Freiberg geological compasses are primarily used to determine the spatial position of rock structures, but also for geological mapping. This geological compass ensures convenient handling as a single or dual-circle compass due to its handy format and drop measuring plate. It is as suitable for general geological field work as for special geo-structural, reservoir tectonic or geo-engineering rock mechanical work.It has a pendulum clinometer, and the declination can be adjusted by means of a gear drive. Its needle is equipped with a sliding copper weight to eliminate inclination. The graduated circle is adjustable, so the declination value can be set. A clinometer for inclination measurements of high accuracy is located in the compass housing. The circular as well as the laterally mounted tubular bubble allow the instrument to be levelled even at hard to reach measuring points. In addition to measuring drop angles, the drop measuring plate also protects the cover glass. - without mirror- sapphire bearing- upright magnetic needle- possibility to lock the magnetic system - easy adjustment of graduated circles- inclination measurements of higher accuracy possible due to lockable clinometer- circular bubble for leveling- lateral tubular bubble for measurements at difficult to reach places- declination and inclination can be easily adjusted to locally applicable values- drop measurement plate to protect cover glass and measure drop angles- protective leather pouch- Compass graduated circle: left hand dialed every 10° (10 gon); diameter 45 mm; scale value 2° (2 gon) - Clinometer: Measuring range 90° (+100 gon); scale value 2° (2 gon); estimate 0.5° (0.5 gon)- Contact edge: graduation length: 70 mm; scale value: 1 mm; settling time of magnetic needle < 50s ; accuracy of direction indication: + 0.5° (+ 0.5 gon); declination setting: arbitrary; tilt range of drop measuring plate: 225° (250 gon); indication of circular bubble: approx. 40'; indication of tubular bubble: approx. 60'Dimensions: Compass 93 x 76 x 22 mm  Pouch104 x 91 x 45 mm Weight 280gr

Even in the age of satellite-based systems, orientation in the terrain is often done the traditional way with topographic map and compass and altimeter. The Freiberg geological compasses are primarily used to determine the spatial position of rock structures, but also for geological mapping.This geological compass ensures convenient handling as a single-circle and also dual-circle compass due to its handy format and drop measuring plate. It is as suitable for general geological field work as for special geologic structurbased, reservoir tectonic or geo-engineering rock mechanical work.It has a pendulum clinometer, and the declination can be adjusted by means of a gear drive. Its needle is equipped with a sliding copper weight to eliminate inclination. The graduated circle is adjustable so that the declination value can be set. A clinometer for inclination measurements of high accuracy is located in the compass housing. A circular bubble as well as a laterally mounted tubular bubble allow the instrument to be levelled even at measuring points which are difficult to reach. In addition to measuring drop angles, the drop measuring plate also serves to protect the cover glass.- with mirror- sapphire bearing- upright magnetic needle- possibility of locking the magnetic system- easy adjustment of graduated circles- inclination measurements of higher accuracy due to lockable clinometer- circular bubble for leveling- lateral tubular bubble for measurements at difficult to reach places- declination and inclination can be easily adjusted to locally applicable values- drop measurement plate to protect cover glass and measure drop angles- protective leather pouch- Compass graduated circle: left hand dialed every 10° (10 gon); diameter 45 mm; scale value 2° (2 gon) - Clinometer: Measuring range 90° (+100 gon); scale value 2° (2 gon); estimate 0.5° (0.5 gon)- Contact edge: graduation length: 70 mm; scale value: 1 mm; settling time of magnetic needle < 50s ; accuracy of direction indication: + 0.5° (+ 0.5 gon); declination setting: arbitrary; tilt range of drop measuring plate: 225° (250 gon); indication of circular bubble: approx. 40'; indication of tubular bubble: approx. 60'Dimensions: Compass 93 x 76 x 22 mm bag 104 x 91 x 45 mm Weight 280gr

This especially developed geologist's compass meets all your demands at a favourable price!Like the "Freiberger" it facilitates the reading of dip and strike in one operation by a vertical circle at the lid hinge.Technical data• pendular clinometer (90°- 0°- 90°) for dip measurement• the initial oscillation of the needle can be accelerated by arresting• circular level, mirror, front and rear sight• 0°-360°, scale value 1° (adjustable circle graduation and needle), vertical circle gradutation 5°, engraved exterior scale• housing: aluminium• size: 80 x 65 x 20 mm• weight: ca. 235 g (leather pouch included) pouch with belt loop included