Glue & Preparation Agents

This is a highly transparent, preaccelerated and light stabilised polyester casting-resin cured by the addition of hardener. It is specially formulated to make thin-sections or for making other medical, technical and geological samples. Refractive index: n=1.56. 0,5-liter with seperated hardener.

Fast curing 1-component ethyl cyanoacrylate adhesive, crystal clear curing for minerals, petrifactions and rocks.Storage time: approx. 1 year in the refrigerator at + 5 °C.

Micromot hot glue gunFast, reliable bonding of metal, wood, plastic (including plexiglass), glass, ceramics, earthenware, cardboard, leather, foams and textiles. The adhesive sets after 30 seconds, depending on the material and the amount applied. Within this time, seating corrections are possible which is a huge advantage over instant adhesives. 7 mm mini sticks are particularly suitable for delicate work (model making, toy making, dried flowers, jewelry making). Sensitive mechanical feed. Integrated set-down device. Short heating time. Technical data:230 V. PTC-controlled heat element for exactly 200° C. 4 sticks 7 x 100 mm and 3 interchangeable nozzles are included.

12 hot glue sticks for glue gun W252size 7x100 mm

Modified acrylic resins ensure that this adhesive cures transparently in a very short time (5-30 seconds) when irradiated with strong UV light.Due to fast processing time, favorable refractive index (n = 1.53) and extreme adhesion, the product is perfectly suited for the production of thin sections. As it is a one-component product, there is no need for the usual premixing.Thanks to a handy dispenser bottle, this UV-glue can be used particularly economical: It only costs a few cents per individual thin section.How to use: After drying, the prepared sample surface is glued onto the slide with its buffed side. To prevent detachment and formation of air bubbles, the sample should be weighted down slightly. It is important not to use too much adhesive or apply too much pressure to avoid breakage. For optimum adhesion, the surfaces should be thoroughly cleaned and degreased before applying glue.Shelf life: approx. 1/2 yearPU: 50 g bottleColors in product photos may differ from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.

Two-component epoxy resin adhesiveMD-pox is a very reactive chemical compound. After mixing, the two-component adhesive achieves extraordinary strength. For bonding metals, ceramics, glass, stone and many hard plastics. For many on-the-spot repairs with high quality and little effort. Easy handling thanks to the automatically regulated two-nozzle system.-achieves extremely high strength- universally applicable- weatherproof- hardening in 5 minutes- also suitable as a casting compound- working life: available in 5 minutes- MD-pox remains stiffly flexible and can therefore guarantee permanent rigidity in case of impacts or vibration.package size: 24ml

Mixing tube for MD-POX (S 28 / SM28)

Place your finds in the surfactant "Rewoquat" - during subsequent soaking, soft matrix such as marl will detach from the fossil.Well applicable for foraminifera, brachiopods and many more. Solnhofen slab lime can easily be cleaned with Rewoquat without corroding the fossil itself: simply apply the fluid with a brush and then rinse off with hot water.1 l bottle

For rocks and fossils of all kinds - prevents drying out and significantly intensifies the color tone without leaving a disturbing shine. Details are highlighted to a greater extent and impact marks are evened out.This is a ready-to-use, solvent-based acrylic resin sealer for rough natural stone.It brings out the surface's color and texture to optimum effect. It also reduceswater and dirt from permeating the stone surface. Dirt build-up is greatly reduced.The color deepening effect also strengthens the surface structure.This stone preserver is UV-resistant and non-yellowing.The remaining dry substance is not harmful to health and is food safe (LFGB-tested).DRYING TIME: About 4 to 6 hours, depending on room temperature and air circulation.Tools (e.g. brushes) can be cleaned with nitro thinner.Keep out of reach of children.Legal regulations for the storage of this product must be observed.PU: 1 liter in a canisterClick here to see our instagram reel on how to use this product!SAFETY:The usual precautionary measures for handling chemicals must be observed.This product is classified and labeled according to the EC regulation (safety data sheet).Sufficient ventilation must be ensured when working in closed rooms.Foodstuffs must be removed before work.Flammable liquid and vapor. Harmful if inhaled. May irritate the respiratory tract.May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects.If medical advice is needed, have product container or label at hand.Keep out of the reach of children.Read label before use. Keep away from heat/sparks/open flames/hot surfaces.Do not smoke. Avoid breathing mist/vapor/aerosol.IF ON SKIN (or hair): Remove all soiled, soaked clothing immediately.Wash skin with water/shower. Store under lock and key.CONTENTS: Acrylates, mineral oil distillateENVIRONMENTAL PROTECTION: Do not allow to enter waterways or soil.DISPOSAL: Uncleaned packaging and larger residual quantities must be disposed of in accordance with local regulations.Colors in product photos may differ slightly from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.