Microscope Slides

Manufactured in Germany from chemically resistant borosilicate glass of the 1st hydrolytic class.The cover glasses meet all the requirements of DIN ISO 8255.Fitting SM13 and SM11PU: 100 piecesDimensions: 21 x 26 mmThickness: approx. 0.13 - 0.16 mmColors in product photos may differ from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.

Modified acrylic resins ensure that this adhesive cures transparently in a very short time (5-30 seconds) when exposed to UV radiation with a wavelength of 365 nm.Due to its fast processing time, favorable refractive index (n = 1.53) and extreme adhesiveness, this glue is the first choice for the production of thin sections. As this is a single-component material, there is no need for the usual pre-mixing. Thanks to the convenient dispensing bottle, the glue can be applied very sparingly. Spread over the individual section, gluing costs amount to just a few cents.Application instructions:After drying, adhere the prepared surface of the sample to the slide with its roughed side facing down. To prevent detachment and air bubbles, weigh your sample down with a weight.  Do not use too much glue and do not apply too much pressure to avoid breaking the sample. For optimum adhesion, surfaces should be thoroughly cleaned and degreased before applying adhesive.StorageUnless otherwise specified, UV adhesive should ideally be stored in a cool, dry place at temperatures between 8 °C and 21 °C. Optimal storage is in the lower half of this temperature range. Shelf life: approx. 1/2 yearPU: 50 g bottleFor technical reasons, the colors in product photos may differ from those of the original product.Our images are for reference purposes only; when you purchase, you will receive a product of equivalent quality.

Slides measuring 48x28 mm are suitable for preparing geological and technical samples. Especially the preparation of thin sections places high demands on the slides.They are made from tension-free raw material with sufficient thickness to prevent breakage. Their edges are sanded at 90° to prevent cuts.Manufactured in Germany from third-class hydrolytic soda-lime glass. Pre-cleaned and ready for use.Matching cover slips: see product number SM12PU: 50 piecesDimensions: approx. 48x28 mmThickness: approx. 1.35 mm (+-0.15 mm)Colors in product photos may differ from those of the actual product due to technical reasons.Our images are for reference only; upon purchase, you will receive a product of equivalent quality.

The 48x28 mm slides are suitable for the preparation of geological and technical specimens.Thin section specimens place high demands on the slides used. They are made from low-stress raw material with sufficient thickness to prevent breakage and their edges are ground at 90°, which reduces the risk of cuts.Made in Germany.PU: 100 piecesMaterial: soda-lime glass of the third hydrolytic classDimensions: approx. 48x28 mmThickness: approx. 1.35 mm (+0.15 mm)with 90° ground edgespre-cleaned and ready for usematching cover slips: see product number SM12Colors in product photos may differ from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.