Pneumatic Tools

Successor model to the W880 – improved version.This airscribe is similar to the Chicago Pneumatic and excellent for preparing fossils. Its low impact frequency makes it more powerful than our W224, easy to regulate, and it has high-precision carbide tips.The stylus tip can be locked into position to prevent it from revolving.Can be used with all standard compressors!Technical data:Air Consumption: very low, 0.1 CFM (cubic feet per minute)Working Pressure: 3.5 - 4.5 bar  (maximum 6.9 bar)Impact frequency: 12,500 blows/minOperating pressure: 4-7 barWeight: 250 gSize: Ø 17 x 160 mmHose: approx. 2.5 m with plug-in couplingCarbide needle: pointed, medium, 38 mmColors on product photos may differ from those of the original product for technical reasons.Our images are for reference only; upon purchase, you will receive a product of equivalent quality.

This model is similar to the Chicago Pneumatic and is ideal for fossil preparation. Its low impact frequency makes it stronger than our W224. It is easy to regulate and has precise carbide tips. Operation with all commercially available compressors possible!Technical data: Impact frequency: 13500 blows/minOperating pressure: 4-7 barWeight: 250 g Dimensions: Ø 17 x 160 mm Hose length: approx. 2.5 m with plug-in coupling Carbide stylus: pointed, medium, 38 mm

The DS pneumatic pen is a versatile preparation tool that is particularly well-suited for medium-coarse work, as well as for fine preparation. It works perfectly, even on delicate fossils that must not be damaged.Developed for demanding work on hard rock and fossil matrix, it can be operated at an air pressure of 2 to 4 bar.The model is equipped with a 3 mm Ø tungsten tip, making it the ideal choice for precise work on tough materials.Watch a short introduction to the DS Pen on our YouTube channelTechnical data:2300 BPMNoise level: Operation – 84 dB(A), Idle – 73 dB (A)Operating pressure: 2-4 barModerate vibration levelsAccessories include a finer tip and a chisel tip.Chisel tips: Best suited for large-area matrix removal, as they enableefficient material removal over larger surfaces.Needle tips: Ideal for working in complex or tight areas, with a finediameter of 1.8 mm at the tip to reach difficult spots withoutcompromising details.Extra-fine needles: Perfect for hard workpieces, offering precision and durability.These needles can be re-sharpened with a diamond wheel when worn,extending their service life for continued use.Please always remember wearing appropriate protective gear!For technical reasons, the colors on your screen may differ from those of the actual product.Our product photos are for reference only; upon purchase you will receive a product of equivalent quality.

Electric engraver with five power settings and a maximum of 7200 revolutions per minute.Ergonomic rubber handle and hook for hanging.Supplied with two tungsten carbide replacement tips, a hex wrench and two templates.Power cable 1.80 m Weight approx. 500 g Dimensions (LxWxH): 200 x 200 x 300 mmClick here for a short introductory video on YTTechnical details:Power: 15 WFrequency: 50 HzVoltage: 230 VFor technical reasons, colors in product photos may differ slightly from those of the original product.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.

1 hard metal stylus (W 540), 1 adapter (W 8130) are included.Technical data:240V / 50/60 HZ; 25 Wweight: 460 gheight: 45 mmlength: 190 mm

When power meets precision - strong air pen for demanding prep jobsOur latest PALEOgrav DS11 is a recently developed air pen that combines power and precision in a unique way. Thanks to its ergonomic design, it fits securely and comfortably in your hand - ideal for longer preparation sessions with more intense material resistance.Tough, reliable and versatile, it represents the perfect choice for challenging work in the field of fossil preparation.Features & benefitsergonomic designthe special shape ensures a firm grip and optimum control - less fatigue even during extended prep sessionspowerful 3mm precision chiselideal for robust prep work. Chisel tips are changeable, custom-madechisel tips are available on requeststrong but adaptableperforms in the range of 2-6 bar with up to 25,000 blows/minute,for forceful and accurate work, depending on your material and requirementsefficient air consumptionwith a maximum air consumption of 55 l/min, the DS11 is suitable for longand intensive preparation sessionssturdy and well-balancedweighing 250 g, the device sits securely in the hand. Its weight helps to absorb vibrations and contribute to more precise work.Scope of applicationThe PALEOgrav DS11 is particularly suited for more powerful yet precise preparation work—ideal for harder rocks or coarse sediments that still need to be removed carefully.Made in Germany.Click here to see the DS11 at work alongside other tools on InstagramClick here for a short video of DS11 on YouTube! Proper protective equipment is essential for fossil preparation!Scope of deliveryPALEOgrav DS11 preparation pen3 mm pointed chisel (pre-mounted)2-meter connection hose with filterNipple fitting, 7.2 mmOperating instructionsColors on product photos may differ slightly from those of the original product due to technical reasons. Our pictures are for reference only, you will receive a product of equivalent quality when purchasing.Comparison of PALEOgrav air pensModelPALEOgrav DS4PALEOgrav DS7PALEOgrav DS11applicationfine preparation, delicate fossilsfine to medium prep jobsstrong yet precise matrix removalchisel size2 mm pointed chisel tip (carbide)2 mm pointed chisel tip (carbide)3 mm pointed chisel tip (carbide)pressure range2–7 bar (3 adjustment springs)2.5–6 bar2–6 barimpact frequencyup to 38.000/minup to 35.000/minup to 25.000/minair consumptionca. 20 l/minca. 25 l/minmax. 55 l/minweightca. 67 g150 g250 gdesignlightweight, slimbalanced, vibration-reduced powerful, vibration-dampingextras3 springs included (soft/medium/hard)2 mm carbide tip, more chisel tip options availablecustoms chisels available on demand

At only 67 g, the PALEOgrav DS4 is a pneumatic air pen specially developed for maximum precision  and high-level comfort during fossil preparation jobs.Extremely light and therefore particularly smooth to control, it is perfectly suited for long sessions of fatigue-reduced work on details. This airscribe offers an excellentreaction speed of up to 38,000 strokes per minute.Features & benefitsergonomic designelegantly sculpted the airscribe rests comfortably in your hand- ideal for fine work over long periods of timeprecise carbide chisel tipequipped with a 2 mm pointed chisel as standard.Additional shapes and lengths are available separatelyadaptable powerusing the spring set included, you can adapt your PALEOgrav DS4 individuallyto material and techniquesoft spring (2-3 bar) for very fine preparationsmedium spring (4-5 bar) for regular precision workhard spring (6-7 bar) for jobs on tougher matrixlow air consumptionwith just around 20 l/min, the DS4 works extremely economically on the compressor,even during longer sessionsgentle lightweightdespite its low weight of just 67 g, the DS4 sits firmly in your handand noticeably minimizes vibrations, which your joints will thank you forApplicationsPALEOgrav DS4 is highly recommended for precise fine to ultra-fine preparation offragile fossils. It shows its strengths particularly with delicate structures and is therefore a recommended tool for collectors, preparators and museums.Made in Germany.Click here to see a short video of the DS4 at work on our YouTube channel.! wearing proper safety gear is crucial during fossil preparation !Scope of delivery:PALEOgrav DS4 preparation pen2 meter connector tube with filterNW 7.2 plug3 springs: hard (pre-assembled), medium, softoperating instructionsColors in product photos may differ from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.Comparison of PALEOgrav air pensModelPALEOgrav DS4PALEOgrav DS7PALEOgrav DS11applicationfine preparation, delicate fossilsfine to medium prep jobsstrong yet precise matrix removalchisel size2 mm pointed chisel tip (carbide)2 mm pointed chisel tip (carbide)3 mm pointed chisel tip (carbide)pressure range2–7 bar (3 adjustment springs)2.5–6 bar2–6 barimpact frequencyup to 38.000/minup to 35.000/minup to 25.000/minair consumptionca. 20 l/minca. 25 l/minmax. 55 l/minweightca. 67 g150 g250 gdesignlightweight, slimbalanced, vibration-reduced powerful, vibration-dampingextras3 springs included (soft/medium/hard)2 mm carbide tip, more chisel tip options availablecustoms chisels available on demand

Advanced fossil preparation - powerful but gentleWhen it comes to preparation of delicate fossils and other materials, the PALEOgrav DS7 is a high-quality pneumatic tool designed for medium to fine preparation work.Its versatility makes it the ideal choice for preparators, ambitious collectors and specialists in paleontology.Features & benefitssolid accuracyequipped with a 2 mm pointed chisel as standard,other chisels are available separatelyergonomic designwell-balanced 150 g enable comfortable handling andless fatigue while workingflexible powerup to 35,000 strokes per minute can be set via the operating pressure,2-3 bar for fine preparations5-6 bar for somewhat tougher workefficient endurancelow air consumption with only approx. 25 l/min - ideal for longer prep sessionssmooth workingDS7 is stable but not heavyweight - the low-vibration airscribeenables joint-friendly preparingApplicationsWith the PALEOgrav DS7 you can prepare medium to fine fossil materials.The continuous adjustment of the air pressure makes the device very flexible and ideal for both beginners and professionals.Made in Germany.Click here to see the DS7 at work together with other prep pens.! Appropriate safety gear is essential when using pneumatic tools for fossil preparation !Scope of deliveryPALEOgrav DS11 preparation pen2 mm pointed chisel (pre-assembled)2 meter connector tube with filterNW 7.2 plug Operating instructionsColors in product photos may differ from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.Comparison of PALEOgrav air pensModelPALEOgrav DS4PALEOgrav DS7PALEOgrav DS11applicationfine preparation, delicate fossilsfine to medium prep jobsstrong yet precise matrix removalchisel size2 mm pointed chisel tip (carbide)2 mm pointed chisel tip (carbide)3 mm pointed chisel tip (carbide)pressure range2–7 bar (3 adjustment springs)2.5–6 bar2–6 barimpact frequencyup to 38.000/minup to 35.000/minup to 25.000/minair consumptionca. 20 l/minca. 25 l/minmax. 55 l/minweightca. 67 g150 g250 gdesignlightweight, slimbalanced, vibration-reduced powerful, vibration-dampingextras3 springs included (soft/medium/hard)2 mm carbide tip, more chisel tip options availablecustoms chisels available on demand

This airscribe is the perfect entry-level tool for fossil preparation!  When working, vibrations are hardly transmitted to your hand, which provides smooth handling. Compressed air is pushed out through exhaustvents in the front next to the stylus, removing dust and debris from your work area.  The W224 connects to an air compressor with adjustable operating pressure from 3 to 7 bar.Pneumatic tools contain many moving parts. Please make sure to clean, maintain and oil your air scribe regularly. You will receive maintenance instructions when purchasing a preparation pen.Delivery includes hose. short introduction of W224 and others chisels on YTHow do I maintain my pneumatic chisel? (YouTube)Technical data:Rpm: 36,000 Air consumption: 25–30 l/minOperating pressure: 3–7 barWeight: 250 gMeasures: Ø 17 x 160 mmHose length: approx. 2.5 m with plug-in couplingStylus included: pointed, carbide, medium, 38 mmPlease always wear appropriate protective gear!For technical reasons, the colors in product photos may differ from those of the original product.Our images are for reference purposes only; you will receive a product of equivalent quality with your purchase.