This BMS 3 Mpix digital camera for microscopes is designed to capture still images, as well as stream and record live video on Windows, Mac, and Linux computers. The user-friendly, stand-alone software for Windows XP/Vista/7/8/10 offers advanced features, including stitching, EDF (Extended Depth of Focus), video-recording, and measurement functions. It allows you to make notes, shapes, watermarks, and precise measurements with ease. Preview and capture resolutions can be set independently, allowing you to simultaneously view high-speed, low-resolution live video, while capturing higher-resolution images or video. The software for Linux and Mac allow you to capture still images and record video, as well as control color and exposure.Designed using the C-mount standard, the camera with the included reduction lens and two sizing-adapters can fit 23mm, 30mm, and 30,5mm photo ports and ocular ports. The reduction lens increases the field-of-view to better match what is seen through the eyepieces. Using a standard USB 2.0 connection, the camera is easy to install. Drawing power from the USB connection, no additional connections are needed. The included calibration slide allows you to take accurate measurements in the software by creating baseline measurements at multiple magnifications.Camera Specifications:Sensor: Aptina MT9T001 CMOS (color)Sensor size: 1/2"“ (6.55 mm(H) x 4.92 mm(V), diagonal 8.19 mm)Reduction lens: 0.5xResolution: 2048 x 1536 (approx. 3.2 MP)Pixel size: 3.2 µm x 3.2 µmG Sensitivity: 1.0 V/lux-sec (550 nm)SN ratio: 43 dBDynamic range: 61 dBScan mode: ProgressiveBinning: 1x1, 2x2, 3x3Frame rate: 43 fps @ 680x510, 22 fps @ 1024x768, 8 fps @ 2048x1536Exposure: 0.128~2000 ms, ROI Auto & ManualA/D converter: 12-bit Parallel, 8-bit R.G.B to computerSpectral range: 380-650 nm (with IR-filter)White balance: ROI White Balance/ Manual Temp-Tint AdjustmentColor rendering Technique: Ultra Fine Colour EngineCapture/Control API: Native C/C++, C++, Directshow, Twain, LabviewRecording system: Still Picture and MovieCooling system: NaturalOperating temperature: -10 °C ~ 50 °CStorage temperature: -20 °C ~ 60 °COperating humidity: 30 ~ 80% RHStorage humidity: 10 ~ 60% RHPower supply: DC 5 V over USB PortOperating system: Windows XP/Vista/7/8/10 (32 & 64 bit), Mac OS X, LinuxPC requirements: CPU equals to Intel Core2 2.8 GHz or higher, Memory: 2 GB or more, USB2.0 portAdvanced BMS_pix3 software for Windows:- offers Stitching, EDF, video recording and measurement functions- conducts measurements for lengths, angles, arcs, areas and etc.- saves still images in BMP, TIFF, JPG, PICT, PTL or other formats - edit and process microscopy images in a manner similar to PhotoShop- live video and still image capture can be set in different resolutions simultaneouslyMore features: add layers, watermarks, mosaics, tiles; adjust color balance, exposure, saturation, contrast, orientation; change resolution, histogram, granulation, diffusion; transform images via edge detection, digital image warping; conducts measurements for single, parallel or perpendicular lines and rectangular, elliptical and irregular areas; adds notes, measurements, text, arrows, labels, and etc. using customizable text with different sizes and colors; conducts measurements in microns, millimeters, centimeters, inches, feet, and etc. under any magnification powers with desired tolerances.

The Euromex CMEX-12 digital 12 Mpix USB-2 CMOS camera and ImageFocus 4 analysing software are the perfect solution for modern digital microscopy for teaching, basic industrial and live sciences applications and for demanding amateurs. Suitable for biological and metallurgical microscopes as well as for stereomicroscopes.Very convenient to use, fits a standard 23.2 mm trinocular tube or eyepiece tube, supplied with USB 2.0 cable.Delivered with 0,5x objective with C-mount, USB 2.0 cable, 30 and 30,5 mm adapters for stereomicroscopy, 76x24 mm calibration 1mm/100 slide, CDROM with ImageFocus 4 software, carton box.Non-compressing real-time image data, high sensitivity camera features, suitable Bright Field, Dark Field, Phase Contrast, Epi-illumination.Compatible with Microsoft Windows XP, Windows Vista, Windows 7 and Windows 8, 32- and 64 bitsSensor: CMOS 1/2.3 inchPixels: 3000 x 4000 pixels, 12.0 MpixScan mode: Progressive, rolling shutterPixel size: 1.33 μm x 1.33 μmFilter: RGBMount: C-mountMax fps: Up to 15 frames per second (4000 x 3000 pixels) / Up to 30 frames per second (2590 x 1944 pixels) Grayscale conversion: 8 bitsColor depth: 24 bitsSensitivity: 1.5 V/lux-sec @ 550 nmExposure: Automatic or manual, from 1 ms to 2 sWhite balance: Automatic/manualDynamic range: 59.5 dbData interface: USB 2.0 at 480 Mb/sOperation: 0 – 60° C, 10-85 % humidity

The Euromex CMEX-5f digital 5 Mpix USB-2 CMOS camera and ImageFocus 4 analysing software are the perfect solution for modern digital microscopy for teaching, basic industrial and live sciences applications and for demanding amateurs. Suitable for biological and metallurgical microscopes as well as for stereomicroscopes.Very convenient to use, fits a standard 23.2 mm trinocular tube or eyepiece tube, supplied with USB 2.0 cable.Delivered with 0,5x objective with C-mount, USB 2.0 cable, 30 and 30,5 mm adapters for stereomicroscopy, 76x24 mm calibration 1mm/100 slide, CDROM with ImageFocus 4 software, carton box.Non-compressing real-time image data, high sensitivity camera features, suitable Bright Field, Dark Field, Phase Contrast, Epi-illumination.Compatible with Microsoft Windows XP, Windows Vista, Windows 7 and Windows 8, 32- and 64 bitsSensor: 1/2.5" CMOSPixels: 5 megapixelsOutput: High resolution 2592 ×1944 pixels formatPixel Size: 2.2 μm × 2.2 μmFrame Rate: @ 2592 x 1944 pixels up to 5 f/s depending camera settings and illumination / @ 1280 x 960 pixels up to 21 f/s depending camera settings and illumination / @ 1024 x 768 pixels up to 25 f/s depending camera settings and illumination / @ 640 x 480 pixels up to 38 f/s depending camera settings and illuminationColor filter: RGBMount: C/CS-mountADC: 10 bitsColor depth: 24 bitsSignal/Noise ratio: 42 dbDynamic range: 65 dbSensitivity: > 1.3 V/lux @ 550 nmExposure: Automatic or manual from 1 ms to 800 msInterface: High Speed USB 2.0 (480 Mb/s)

This BMS 10 Mpix digital camera for microscopes is designed to capture still images, as well as stream and record live video on Windows, Mac, and Linux computers. The user-friendly, stand-alone software for Windows XP/Vista/7/8/10 offers advanced features, including stitching, EDF (Extended Depth of Focus), video-recording, and measurement functions. It allows you to make notes, shapes, watermarks, and precise measurements with ease. Preview and capture resolutions can be set independently, allowing you to simultaneously view high-speed, low-resolution live video, while capturing higher-resolution images or video. The software for Linux and Mac allow you to capture still images and record video, as well as control color and exposure.Designed using the C-mount standard, the camera with the included reduction lens and two sizing-adapters can fit 23mm, 30mm, and 30,5mm photo ports and ocular ports. The reduction lens increases the field-of-view to better match what is seen through the eyepieces. Using a standard USB 2.0 connection, the camera is easy to install. Drawing power from the USB connection, no additional connections are needed. The included calibration slide allows you to take accurate measurements in the software by creating baseline measurements at multiple magnifications.Camera Specifications:Sensor: Aptina MT9J001Sensor size: 1/2.3" (6.44 mm(H) x 4.616 mm(V))Resolution: 3584 x 2748 (approx. 10,000,000 pixels)Reduction lens: 0.5xPixel size: 1.67 µm x 1.67 µmFrame rate: 27 fps @872x654, 8 fps @1744x1308, 1.9 fps @3584x2748Exposure: 0.4~2000 ms, ROI Auto & ManualScan mode: ProgressiveDynamic range: 65.2 dBA/D converter: 12-bit Parallel, 8-bit R.G.B to computerSN ratio: 34 dBSpectral range: 380-650 nm (with IR-filter)Binning: 1x1, 2x2, 4x4White balance: ROI White Balance/ Manual Temp-Tint AdjustmentColor rendering Technique: Ultra Fine Colour EngineCapture/Control API: Native C/C++, C++, Directshow, Twain, LabviewRecording system: Still Picture and MovieCooling system: NaturalOperating temperature: -10 °C ~ 50 °CStorage temperature: -20 °C ~ 60 °COperating humidity: 30 ~ 80% RHStorage humidity: 10 ~ 60% RHPower supply: DC 5 V over USB PortOperating system: Windows XP/Vista/7/8/10 (32 & 64 bit), Mac OS X, LinuxPC requirements: CPU equals to Intel Core2 2.8 GHz or higher, Memory: 2 GB or more, USB2.0 portAdvanced BMS_pix3 software for Windows: - offers Stitching, EDF, video recording and measurement functions- conducts measurements for lengths, angles, arcs, areas and etc.- saves still images in BMP, TIFF, JPG, PICT, PTL or other formats - edit and process microscopy images in a manner similar to PhotoShop- live video and still image capture can be set in different resolutions simultaneouslyMore features: add layers, watermarks, mosaics, tiles; adjust color balance, exposure, saturation, contrast, orientation; change resolution, histogram, granulation, diffusion; transform images via edge detection, digital image warping; conducts measurements for single, parallel or perpendicular lines and rectangular, elliptical and irregular areas; adds notes, measurements, text, arrows, labels, and etc. using customizable text with different sizes and colours; conducts measurements in microns, millimeters, centimeters, inches, feet, and etc. under any magnification powers with desired tolerances.