Geodur superglue, 20g, low viscosity

Superglue for universal application.This one-component superglue (ethyl 2-cyanoacrylate) is ideal for minerals, rocks, and fossils, and cures to a crystal-clear finish quickly. Bonds obtain hand strength after 10-70 secondsInstructions for use:- Use only outdoors or in well-ventilated areas.- Keep out of reach of children.- Wear protective gloves/protective clothing/eye protection.- Dispose of contents/container in accordance with local regulations.Shelf life/storage time: approx. 1 year at 5°C, approx. 6 months at room temperature. In general, a cool and dark storage place should be preferred.Viscosity: mediumPU: 20 g bottleColors in product photos may differ from those of the original product due to technical reasons.Our images are for reference only; when you purchase, you will receive a product of equivalent quality.

Superglue with high impact tolerance.This 1-component adhesive (ethyl 2-cyanoacrylate) is ideal for minerals,rocks, and fossils, and cures to a crystal-clear finish.Bonds obtain hand strength after 5-40 secondsInstructions for use:- Use only outdoors or in well-ventilated areas.- Keep out of reach of children.- Wear protective gloves/protective clothing/eye protection.- Dispose of contents/container in accordance with local regulations.Shelf life/storage time: approx. 1 year at 5°C, approx. 6 months at room temperature. Viscosity: highPU: 20 g bottleColors in product photos may differ from those of the original product due to technical reasons.Our images are for reference only; when you purchase, you will receive a product of equivalent quality.

Modified acrylic resins ensure that this adhesive cures transparently in a very short time (5-30 seconds) when exposed to UV radiation with a wavelength of 365 nm.Due to its fast processing time, favorable refractive index (n = 1.53) and extreme adhesiveness, this glue is the first choice for the production of thin sections. As this is a single-component material, there is no need for the usual pre-mixing. Thanks to the convenient dispensing bottle, the glue can be applied very sparingly. Spread over the individual section, gluing costs amount to just a few cents.Application instructions:After drying, adhere the prepared surface of the sample to the slide with its roughed side facing down. To prevent detachment and air bubbles, weigh your sample down with a weight.  Do not use too much glue and do not apply too much pressure to avoid breaking the sample. For optimum adhesion, surfaces should be thoroughly cleaned and degreased before applying adhesive.StorageUnless otherwise specified, UV adhesive should ideally be stored in a cool, dry place at temperatures between 8 °C and 21 °C. Optimal storage is in the lower half of this temperature range. Shelf life: approx. 1/2 yearPU: 50 g bottleFor technical reasons, the colors in product photos may differ from those of the original product.Our images are for reference purposes only; when you purchase, you will receive a product of equivalent quality.