Retrofitting for "Basic" Sand Blasters (70 - 500µm)

The compact fine blasting unit works with adjustable operating pressure (2-6 bar) via pressure reducer with water separator. Air consumption: min. 65 l/min. Ideal for using outside or in a blasting chamber.Blasting agents are only used once, as no contamination of the tanks and supply lines is permitted. Equipment:Foot switch, pressure regulator with water separator and pressure gauge, blasting handle and round nozzle 1.2 mm, translucent abrasive tank, compressed air connection via quick-release coupling. Technical data: - Compressed air required, but no power connection- Individual adjustment of blasting pressure from 1-6 bar (display via pressure gauge)- Air consumption: max. 120 l/min depending on nozzles- Integrated water separator- Manual, pneumatic shut-off valve or control via pneumatic foot switch- Noise level in accordance with DIN 45635-01-KL3 < 70 dB (A)- Dimensions: 220 x 250 x 130 mm- Weight: approx. 4.7 kgColors on product photos may differ from those of the original article due to technical reasons.Our pictures are for reference only, when purchasing you will receive a copy of equivalent quality.

This compact air abrasive unit has been developed for precise and smooth fossil preparation.Its integrated airflow ensures a steady stream of abrasive powder without clogging or clumping, thanks to controlled turbulence. Originally designed for the use with iron powder, the wear-resistant carbide nozzle guarantees a long service life, even with intensive use. This device can be used with other media as well, as long as the abrasive has good flow properties.The equipment includes a high-quality pressure reducer with integrated pre-filter and adownstream micro filter (99.99 % separation efficiency). Featuressuitable for grain sizes 50-220µmimmediate start/stop functionair-reversal feature for quick ventilation and cleaningconvenient and clean refill via screw-on funnelpressure tested, corrosion-resistant abrasive tank made of stainless steelconnection port for external devicespressure regulator with water separator and pressure gaugeblasting pen and round nozzle 0.8 mmquick coupling to compressed airTechnical dataOutside measures: 350 mm (L) × 330 mm (W) × 500 mm (H)Abrasive tank: stainless steel, 2 liter volume, corrosion-resistantBlasting nozzle: Ø 1.0 mmMixing nozzle: Ø 1.0 mm and Ø 0.8 mmHose length: 1 meterInlet pressure: 6 - 10 barWorking pressure: continuously adjustable from 0.5 - 10 barConnections:- pressure reducer with pre-filter and micro filter- connection WN 7.2- pneumatic shut-off for pinch valve (optionally with foot switch)- connection port for external devicesWeight: approx. 4.7 kgColors in product photos may differ from those of the original product for technical reasons.Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.

For preparationPlace your specimens in the detergent "Rewoquat" - during subsequent soaking, the soft matrix such as marl will detach from the fossil. Well applicable for foraminifera, brachiopods and many more. Can also be used to clean Solnhofen slab lime without attacking the fossil itself: simply brush over it and then wash off with hot water.0.5-liter bottle (picture shows 1-liter bottle)