Stone preserver 0.25l bottle (color intensifier matt)
€14.50
Currently not available, Delivery time 1-3 days
Product information "Stone preserver 0.25l bottle (color intensifier matt)"
For all types of rocks and fossils - prevents drying out and significantly intensifies
color shade deepening without disturbing shine. Details are highlighted more intensely and
impact traces are smoothed out.
It is a ready-to-use, solvent-based acrylic resin sealer for rough natural stone.
Color and structure of the surface are optimally accentuated. Moreover, it reduces
the permeation of water and dirt into the surface. Soiling is greatly reduced.
Its color intensifying effect also strengthens the surface structure.
- stone preservative is UV-resistant and non-yellowing
- the residual dry active ingredient is harmless to health and food-safe
(LFGB-tested) - DRYING TIME: depending on room temperature and air circulation
approx. 4 to 6 hours - work equipment (e.g. brushes) can be cleaned with nitro thinner
- keep out of reach of children
- legal regulations for product storage must be followed
PU: 0.25 liter bottle
CAUTION:
The usual precautionary measures for handling chemicals must be observed.
This product is classified and labeled according to the EC regulation (safety data sheet).
Sufficient ventilation must be ensured when working in closed rooms.
Food and beverages must be removed before work.
Flammable liquid and vapor.Harmful if inhaled.May irritate the respiratory tract.
May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects.
If medical advice is needed, have product container or label at hand.
Keep out of the reach of children.
Read label before use. Keep away from heat/sparks/open flames/hot surfaces.
Do not smoke. Avoid breathing mist/vapor/aerosol.
CONTACT WITH SKIN (or hair): Remove all soiled, soaked clothing immediately.
Wash skin with water/shower. Store under lock and key.
CONTENTS: Acrylates, mineral oil distillate
ENVIRONMENTAL PROTECTION: Hazardous to water and soil.
DISPOSAL: Dispose of non-cleaned packaging and any amount of residues in accordance with local regulations.
Colors in product photos may differ slightly from those of the original product for technical reasons.
Our pictures are for reference only, when purchasing you will receive a product of equivalent quality.
Login
ebenso empfehlenswert / to recommend
This powdery polymer (polyvinyl acetate) is ideal for preserving, sealing, and stabilizing your mineral and fossil finds. Additional advantages include increased contrast and color depth without a distracting glossy finish.Mowilith is particularly characterized byhigh light resistancea transparent, slightly shimmering filmadhesive and hardening componentsdurabilitycolor tone preservation instead of deterioration, compared to the use ofe.g., fluates or RemberApplication: The granulate is dissolved in a suitable solvent (e.g., acetone)in a concentration of 5-10% and can then be applied with a brush.It is advisable to test the product on a concealed area or a less valuable fossil beforehand.Mowilith can also be almost completely removed with acetone.PU: 500g tinSafety instructions:Ensure adequate ventilation during use.Wear rubber or protective gloves.Do not inhale any vapors.For technical reasons, colors in product photos may differ slightly from those of the original product.Our images are for reference purposes; upon purchase, you will receive a product of equivalent quality.
Prices incl. VAT plus shipping costs
For preparationPlace your specimens in the detergent "Rewoquat" - during subsequent soaking, the soft matrix such as marl will detach from the fossil. Well applicable for foraminifera, brachiopods and many more. Can also be used to clean Solnhofen slab lime without attacking the fossil itself: simply brush over it and then wash off with hot water.0.5-liter bottle (picture shows 1-liter bottle)
Prices incl. VAT plus shipping costs
Modified acrylic resins ensure that this adhesive cures transparently in a very short time (5-30 seconds) when exposed to UV radiation with a wavelength of 365 nm.Due to its fast processing time, favorable refractive index (n = 1.53) and extreme adhesiveness, this glue is the first choice for the production of thin sections. As this is a single-component material, there is no need for the usual pre-mixing. Thanks to the convenient dispensing bottle, the glue can be applied very sparingly. Spread over the individual section, gluing costs amount to just a few cents.Application instructions:After drying, adhere the prepared surface of the sample to the slide with its roughed side facing down. To prevent detachment and air bubbles, weigh your sample down with a weight. Do not use too much glue and do not apply too much pressure to avoid breaking the sample. For optimum adhesion, surfaces should be thoroughly cleaned and degreased before applying adhesive.StorageUnless otherwise specified, UV adhesive should ideally be stored in a cool, dry place at temperatures between 8 °C and 21 °C. Optimal storage is in the lower half of this temperature range. Shelf life: approx. 1/2 yearPU: 50 g bottleFor technical reasons, the colors in product photos may differ from those of the original product.Our images are for reference purposes only; when you purchase, you will receive a product of equivalent quality.
Prices incl. VAT plus shipping costs